|
|
|
 Home /
Bath /
What you need to know about bidets
|
• Bio Bidet
|
|
The procedure specified below is for BIO Bidet model BB-300 H only. You may also want to see other installation pages of other BIO Bidet models:
|
What you have
|
|
What you need
|
|
|
PREPARATION
1. Remove the existing toilet seat.
To access screw, locate the lid at the end of the seat and push it upward with a sharp object. Take out seat by loosening screw and holding bolt from bottom.
2. Turn off the main water valve.
3. Take out exiting water pipe. Loosen fill valve just below the water tank and compression nut from control valve. Then take out water pipe by tapping fill valve.
4. Flush down all the remaining water in water tank.
|
ACTUAL INSTALLATION
1. Be sure to shut off main valve.
2. Use the supplied hose to connect the body joint of the main unit to the branching valve. tighten the coupling nuts at the body joint and the branch outlet.
3. Be sure not to over tighten flexible hose at flush tank end. Use only hand pressure.
4. Using Teflon tape is recommended.
5. Shield the nozzle with your hand to protect the water from spraying too far during the trial operation.
6. Press the CLEANSING button to test the water stream.
|
CLEANING THE STRAINER
The unit will not operate properly if the strainer is clogged. Be sure to clean the strainer.
1. Close the shutoff valve.
2. Flush the toilet to empty the flush tank.
3. Unscrew the nut.
4. Clean the strainer using a small brush.
5. Re-screw the nut.
6. Open the shutoff valve.
|
|
Glossary of Terms to help you along
"One-Piece" Toilet - A toilet sculpted into a seamless unit. The result is a sleek toilet with no crevices between the tank and bowl.
"Two-Piece" Toilet - have a separate tank and bowl which are bolted together upon installation.
"Round Bowl" - A measurement of inches from middle of the two seat bolts on the back to edge of toilet (Figure A) that equals 16.5 or less
"Elongated Bowl"-A measurement of inches from middle of the two seat bolts on the back to edge of toilet (Figure A) that equals 16.6 or more
|
|
|
|
WHY USE A BIDET?
American households consume 15,000,000 trees a year using bathroom tissues!
 In 1997, daily toilet paper production by the industry is 83,048,116 rolls, and by year 2003 it reached more than 100,000,000 rolls per day.
If every household in the U.S. replaced just one roll of 500 sheet virgin fiber bathroom tissue with 100% recycled ones or our bidet, we could save 297,000 trees, 1.2 million cubic feet of landfill space, equal to 1,400 full garbage trucks, and 122 million gallons of water, a year supply for 3,500 families of four.
It takes some 2.7kg of wood, 1.30g of calcium carbonate, 85g of sulphur, 40g of chlorine and 300 liters of water to make 1 kg of conventional toilet paper. A modern mill typically uses some 10-12 gigajoules of energy to produce a tone of paper from pulp; it takes some 2 gigajoules of energy to pulp and clean a tone of waste paper. The toilet paper production uses large amounts of energy, water, and chemicals, and generates vast amounts of air and water pollution and solid waste. The toilet paper 7 board industries rank among the largest industrial users of water in the Europe. Toilet paper has been bleached with a chlorine compound and has contributed to dioxin pollution. This may make them a contributor to cancer, reproductive disorders among adults, deformities and developmental problems in children, immune system breakdowns.
So why buy from US vs. them?
• Price Matching - If you find a better price for a bidet or delivery service on the Internet, call us, we will match them!
• Customer Service is our #1 Priority!
• 24/7 phone support toll free!
• One-year warranty protection from us for all bidet products. (Daelim Cleanlet bidets offers two year warranty.)
• Additional protection - ToTo bidet, Panasonic bidets, and Matsushita bidet offer all customers a one year warranty. The warranty registration cards are supplied by the companies.
• Long Lasting - The average life span of ToTo bidet, Panasonic bidets, and Daelim bidet is 30 years. Previous customers in Asia have used ToTo bidets, Panasonic bidet, and Daelim bidets for more than 25 years. They have experienced and acknowledged superior quality of all these products.
• Easy to install - Anyone can install bidet units on existing toilets. However, those who are not naturally gifted in handy works can call the local plumbers in the yellow pages. They will charge about $50.
• Everything Included - All bidets include: T-shape connector (1), Connection hose (1), Toilet Bolt (2), Nut (2), User's Manual (English), Warranty Registration Card, and Installation Manual (English).
• Works everywhere - All bidets conform to American electricity AC 120V/60 Hz.--Able to use any electrical outlet in the bathroom (with extension cord).
|
Shopping Cart
Sales 1-800-550-0056 Customer Service 1-888-234-7007 
